Software Installation - Ubiquiti CRM Point CRM-P Quick Start Quide

Software Installation

The CRM Control software is pre-installed on the
CRM Point. To access it, follow these steps:
1. Ensure that your host system has an Internet
connection and is on the same Layer-2 network
as the CRM Point.
2. The CRM Point is set to DHCP by default, so it
will try to automatically obtain an IP address.
Assign a specific IP address to the CRM Point, or
check the DHCP server to see which IP address
was assigned to it.
You can also discover the CRM Point using the
Ubiquiti® Device Discovery Tool, available at
https://www.ubnt.com/download/utilities
3. Launch a web browser. In the address field,
type http: followed by the IP address of the
CRM Point. Press enter (PC) or return (Mac).
4. If this is your first time using the CRM Point,
proceed to step 5.
If you have previously logged into the
CRM Point, proceed to step 7.
5. The CRM Point user interface will appear and
begin upgrading the device software to the
latest version.
http://<IP_address>