Logging History; Syntax; Parameters; Default - Nortel Contivity1510D Reference

logging history

This command determines what types of messages are stored in the system logs.
Once the message type level has been established, future messages stored in the
system logs must be at or above this level for them to be saved.
This is different from the IOS implementation, where this command only affects
syslog messages.
On the switch a warning is displayed if the level set with this command does not
agree with the level required for syslog message forwarding (as set in the logging
facility syslog command).

Syntax

logging history {
default logging history

Parameters

alerts
errors
notifications
debugging

default

Default
Defaults to a logging level of alerts.
The default logging history command sets the level to errors for future messages.
alerts|errors|notifications|debugging
Log all emergency and alert messages.
Previous level plus critical and error conditions.
Previous level and warnings and notifications.
All message levels.
Sets logging level back to alerts for future messages.
Reference for the Contivity VPN Switch Command Line Interface
Chapter 2 CLI Command Summary 83
}