Sangean DPR-16 Operating Instruction page 23

FM Radio
Manual tuning
. Carefully extend the telescopic aerial.
2. Press the Standby button to switch on your radio. The display
will show "Welcome to Digital Radio" for a few seconds.
3. Press the Band button to select the FM band.
4. Rotate the Tuning Control Rotary to tune to a station. The frequency
will change in steps of 50 kHz. When the end of the waveband is
reached the radio will recommence tuning from the opposite end
of the waveband.
5. Use the Volume buttons to adjust the sound level or press the
Mute button to mute the sound as needed.
GB
22