Summary of Contents for RAD Torque Systems MV-RAD 6
- Page 1 - INNOVATION DRIVEN PERFORMANCE USER MANUAL MV-RAD ELECTRIC SERIES 65 - 8.000 Nm User manual for: • MV-RAD 6 • MV-RAD 14 • MV-RAD 21 • MV-RAD 34 • MV-RAD 45 • MV-RAD 60 • MV-RAD 80...
-
Page 2: Table Of Contents
User manual MV-RAD Table of contents 1. General instructions 2. Description of the functions 3. Setting direction of rotation 4. Setting the torque 4.1 Setting the torque 4.2 Torque Check program (option) 4.3 User menu 5. Operation of the torque wrench 5.1 Rotating counter clockwise 5.2 Rotating clockwise 6. Movement of the reaction arm 6.1 Installing the reaction arm 6.2 Reaction arm height... -
Page 3: General Instructions
1. General instructions NOTE: Do not use this torque wrench before reading these instructions. If the torque wrench does not function properly, do not attempt to repair the torque wrench, but contact RAD Torque Systems B.V. immediately RAD electric torque wrenches are torque-controlled. Correct operation requires the following: •... -
Page 4: Setting The Torque
User manual MV-RAD 4. Setting the torque When operating this torque wrench: 1. use only suitable and proper impact sockets 2. the handle can be rotated for ease of installation 3. there may be no clearance between the torque wrench and the reaction arm 4. -
Page 5: User Menu
4. Informatie (Information / Informationen) This option displays the tool information. This information is required for the telephone detection of errors by RAD Torque Systems B.V. 5. Wachtwoord (Password / Kennwort) When entering a password, you will enter the following sub-menu. Here, the following options are available: •... -
Page 6: Movement Of The Reaction Arm
User manual MV-RAD 6. Movement of the reaction arm 6.1 Installing the reaction arm Ensure the reaction arm and retaining ring are installed securely to hold the reaction arm in place. Make sure the reaction arm is in contact with a solid reaction point before you operate the tool. When the tool is in operation the reaction arm rotates in the opposite direction to the output square drive and must be allowed to rest squarely against a solid object or surface adjacent to the bolt to be tightened, see Figure 2. -
Page 7: Reaction Point
NOTE: Make sure you observe the directions on the warning labels at all times. RAD tools have been designed with safety in mind however, as with all tools you must observe all general workshop safety practices, and specifically the following: 1. -
Page 8: Errors
9. Warranty 9.1 New tool warranty Any new tool branded with the RAD name and purchased from RAD Torque Systems B.V., or through one of its authorized distributors or agents, is warranted to the original purchaser against defects in materials and workmanship for a period of twelve (12) month from the date of delivery to the end user. -
Page 9: Repaired Tool Warranty
To qualify for the above mentioned warranties, written notice to RAD Torque Systems B.V. must be given immediately upon discovery of such defect, at which time, RAD Torque Systems B.V. will issue an authorisation to return the tool. Freight costs must be paid in advance. When returning a tool, the reaction arm/s being used with the tool must also be returned. - Page 10 User manual MV-RAD STEEL CONSTRUCTION OIL & GAS WINDPOWER AEROSPACE PETROCHEMICAL COMMERCIAL VEHICLES OFFSHORE OFFICIAL RAD DISTRIBUTOR FOR THE BENELUX: RAD TORQUE SYSTEMS B.V. ZUIDERGRACHT 19 3763 LS SOEST THE NETHERLANDS +31 (0)35 - 5882450 PHONE: E-MAIL: INFO@RADTORQUE.NL SALES@RADTORQUE.NL TECHSUPPORT@RADTORQUE.NL WWW.RADTORQUE.NL...