Vaporetto ECO PRO 3000 Manual page 13

Table of Contents

Advertisement

tion e.g. for removing creases from curtain,
clothing etc
• To obtain a continuous jet of steam move the
sliding button (U). The steam will continue to
come out even when the steam request but-
ton (R) is released. To stop the steam flow
move the sliding button backwards (U).
NOTE: using the iron, it is advisable to adjust the
steam jet at medium output, or to do some test-
ing in order to find the position on (U) which is
most suitable to the fabric to be ironed.
DRY IRONING
• If you need to DRY iron (ONLY) (NOT steam
ironing), press the accessory on/off switch (C)
and adjust the temperature of the iron by turn-
ing dial (S) to the temperature required for the
fabric (as shown on the dial).
IMPORTANT
• Do not leave the iron unattended whilst
connected to the mains.
• Iron only on heat resistant surfaces.
TRIANGULAR BRUSH (23)
A new accessory whose shape allows access
into the most difficult corners.
WALLPAPER STRIPPER TOOL (24)
Specially designed for easy removal of wallpa-
per without significant wetting.
VAPORETTO ECO PRO 3000
STEAM DISINFECTOR
(mod. PAEU0197)
The Steam Disinfector is the sanitiser for house-
hold surfaces that can connect up to your Va-
poretto to deliver steam at high temperatures
(up to 180°C) together with the sanitising solu-
tion HPMed. The system allows for the elimina-
tion of the bacterial, fungous and viral load on
the surfaces and fabrics to which it is applied in
just a few seconds. This helps prevent the risk of
possible infections.
The Steam Disinfector is a Polti exclusive and is
only available from the best electrical appliance
stores.
24

Advertisement

Table of Contents
loading

Related Products for Vaporetto ECO PRO 3000

Table of Contents