Operation; Maintenance - First FA-5590 Instruction Manual

INSTRUCTION MANUAL
PARTS DESCRIPTION
(see picture 1)
1. Thermostat
2. Heat select switch
3a. Indicator light for heat select switch
3b. Indicator light for thermostat switch
4. Handle
5. Air outlet
6. Air inlet
7. Base
8. Oscillation switch
• Thank you very much for your purchase
of our Fan heater.
• Please read the instruction manual
carefully and keep it for future use.
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic
precautions should always be followed
to reduce the risk of fire, electrical shock,
burns and other injury, including the
following:
1. Study this instruction manual carefully
before using the product.
2. The device is only intended for private
and not for any commercial use.
3. Remove the unit from its packaging and
check to make sure it is in good condition
before using.
4. Do not let children play with parts of the
packing (such as plastic bags).
5. Check the household voltage to ensure it
matches the fan's rated specification.
6. Check the power cord and plug carefully
before use to make sure that they are not
damaged.
7. Before unplugging the power cord, be
sure to turn off the power. When touching
the unit, be sure your hands are dry to
prevent from electric shock.
8. This Heater is hot when in use. To avoid
burns, do not let bare skin touch hot
surfaces. Always use handle when moving
this Heater. Keep combustible materials,
such as furniture, pillows,bedding, papers,
clothes and curtains at least 900mm from
the front of the heater and keep them at
least 300mm from the sides and rear.
9. Do not block air intakes or exhaust in any
manner to prevent a possible fire.
10. Do not use or leave the fan heater
unattended when children, old or disabled
people are present.
11. Always unplug heater when not in use.
M_5590_v02.indd 2-3 M_5590_v02.indd 2-3
12. Prevent water from getting into the
housing of the heater during operation
or in storage. Hazard of electric shock.
Always store in dry area with no moisture.
13. Do not use in places where there are gas,
paint or other inflammable goods and
objects
14. This heater is not intended for use in
bathrooms, laundry areas and similar
indoor locations. Never locate the heater
where it may fall into a bath tub or other
bodies of water.
15. Do not run the cord under carpeting. Do
not cover cord with throw rugs, runners
or the like. Arrange cord away from traffic
area and where it will not be tripped over.
16. Do not use a soft surface, like a bed,
where openings may become blocked.
17. Use this heater only as described in this
manual. Any other uses not recommended
by the manufacturer may cause fire,
electric shock, or injury to persons and
may void warranty.
18. Avoid the use of an extension cord
because the extension cord may overheat
and cause a risk of fire.
19. Do not use outdoors.
20. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
21. Children should be supervised to ensure
that they do not play with the appliance.
22. Where possible, avoid the use of
extension cords because the extension
cord may overheat and cause a risk of
fire.If they must be used, minimize the
risk of overheating by ensuring that they
are VDE listed, a minimum H05RR-F
2
2*0,75mm , rated not less than 2070W.
Never use a single extension cord to
operate more than one heater.
CAUTIONS
• This appliance is not a toy.
• This appliance is for household use only.
• Do not immerse the unit in the water.
• To avoid the risk of fire or electric shock do
not remove the housing by yourself.
• Any servicing other than cleaning and
user maintenance should be performed by
an authorized service representative.
2
• If the supply cord is damaged, it must be
replaced by a special cord or assembly
available from the manufacturer or its
service agent.
• Repair should be done by an authorized
service personal only.

OPERATION:

When the appliance is switched on for the
first time, a slight smell may be emitted.
Please ensure sufficient ventilation.
1. Carefully remove the Heater from the bag
and the carton.
2. Place the Heater on a firm, level surface
3. Plug the cord set into a fit electrical
outlet. Turn on the Heat Select Button,
the Orange indicator light will be on. Turn
on the Thermostat Button, the Green
indicator light will be on.
THERMOSTAT
WHEN THE CONVECTOR IS SWITCHED
ON.
1. Turn the thermostat knob. (fig. 2)
2. Once the room temperature is reached
the desired temperature, turn the
thermostat knob slowly in an anti-
clockwise direction unit a „click" sound
and that is the setting temperature. Now,
the convector is switched off and the
indicators lights off.
3. The convector will automatically maintain
the set temperature. It will switch on when
the room temperature is below and switch
off if above the setting.
HEAT SETTING:
The fan heater incorporates a rotation switch
you can select the different air by turning the
switch clockwise to:
O OFF
COOL AIR
1 WARM AIR (900W)
2 WARM AIR (1800W)
OSCILLATION FUNCTION:
Pressing the Oscillate switch will allow the
Heater to oscillate side by side. To stop the
oscillation, press the Oscillate switch once
more.
SAFETY TIP-OVER SWITCH:
This unit is equipped with a Safety Tip-Over
switch located inside the Heater. This feature
cuts the main power to the unit if the Heater
gets knocked over. If the unit does tip over,
simply stand it up right to resume operation.
3
SECURITY SYSTEM:
• The appliance has a security system
which automatically switches the
convector off when it is overheating.
• If overheating occurs, remove the plug
from socket, push buttons to switch the
convector off and let it cool down for
at least 10 minutes. Put the plug in the
socket and switch the heater on.
• If you still notice the same defect above
mentioned remove the plug from socket
and have the convector serviced by
authorized service personal only.

MAINTENANCE:

• The fan heater only needs regular
cleaning on the outside.
• Before you clean the unit, turn the switch
to OFF. Remove the plug from socket and
wait until the fan heater cool down.
• Use a damp cloth to wipe the heater
housing.
• Do not use water, detergents, abrasive
cleaning liquids or chemical agents
(alcohol, gasoline etc.) to clean the unit.
• Store the Heater with these instructions in
the original carton in a cool, dry place.
TECHNICAL CHARACTERISTICS
220-240V ~ 50/60Hz • 1800W
2010.10.29 3:21:04 PM 2010.10.29 3:21:04 PM