media-tech MT1074 Instruction Manual

BLUETOOTH
OPTICAL MOUSE
Hi-Res Wireless Optical Mouse

Package contents

■ Bluetooth Optical Mouse
■ 2 AAA alkaline batteries
■ User manual

System requirements

■ Windows ME, 2000, XP or Vista
■ Built-in Bluetooth function

Installation

ON/OFF switch
Battery cover
Diagram 1

Installing batteries

1. Remove the battery cover.
2. Insert two AAA batteries into the battery com-
partment, make sure to properly orient the posi-
tive (+) and negative (-) ends as specifi ed by the
marks in the battery compartment. Replace the
battery cover and make sure it is locked.
3. Switch on the mouse, LED light will blink
Connecting the Bluetooth mouse
Before you install the Bluetooth mouse, please make
sure that your computer supports Bluetooth func-
tion, and fi nished the Bluetooth software installation.
Software is available like Wincomm, IVT or the Micro-
soft built-in software.
Scrolling
wheel
Right key
Simultaneously press both Left and Right keys for
5 seconds, the LED light in "DPI-adjusting key" will
shine, it's now searching the Bluetooth device. And
please follow the below procedures to install the
mouse.
Note: If you use other Bluetooth software, the instal-
ling procedure may be similar. You need to try and
understand it by yourself.
Description of keys and DPI Adjustment
Using "DPI-adjusting key", the resolution of mouse
can be switched between 800DPI, 1000DPI and
1200DPI in turn. That LED light in "DPI-adjusting key"
blinks slowly indicates 800DPI, faster 1000DPI and
fastest 1200DPI.
Backward and Forward
DPI-adjusting
Backward and Forward keys for your easily navigat-
key
ing forward and backward on the Internet.
Backward
Low-voltage alarming function
Forward
When batteries have been used for some time and
discover the LED light in "DPI-adjusting key" blinks
Left key
automatically, which reminds you that batteries volt-
age is becoming low, suggested you replace the bat-
teries with new ones.
MT1074
Instructions Manual
1. Make sure that the Bluetooth
function has been activated.
Double click the Bluetooth
Icon on the Task Bar or in the
Control Panel, click "Add a
Bluetooth device".
2. Select "My device is set up
and ready to be found", click
"Next".
3. Select Bluetooth mouse,
click "Next".
4. Select „Don't use a passkey",
click „Next" and then „Finish".
EN