media-tech MT1073 Instruction Manual

WIRELESS OPTICAL
MOUSE 2.4G
Hi-Res Wireless Optical Mouse
Package contents
■ Wireless Optical Mouse
■ USB receiver
■ 2 AAA alkaline batteries
■ User manual
System requirements
■ Windows ME, 2000, XP or Vista
■ Free USB Port
Installation
ON/OFF switch
Battery cover
Position for storing
receiver
Diagram 2
Installing the battery
1. Remove the battery cover.
2. Insert two AAA batteries into the battery com-
partment, make sure to properly orient the
positive (+) and negative (-) ends as specifi ed
by the marks in the battery compartment. Re-
place the battery cover.
3. Switch on the mouse, the LED in bottom of
mouse will blink.
Installing the receiver
1. Insert receiver into USB port of PC, the com-
2. The mouse may use then. If the user wrongly
Left key
Forward
Backward
Using "DPI-adjusting key", the resolution of
Diagram 1
mouse can be switched between 800DPI and
1600DPI in turn. That LED light in "DPI-adjust-
ing key" blinks slowly indicates 800DPI and fast
1600DPI.
Backward and Frontward keys for your easily
navigating forward and backward on the Inter-
net.
When batteries have been used for some time
and discover the LED light in"DPI-adjusting key"
blinks automatically, which reminds you that
batteries voltage is becoming low, suggested
you replace the batteries with new ones.
Instructions Manual
puter system will automatically detect it and
prepare it for full operation.
operates, please redo the above operating
procedures.
Description of keys and DPI adjusting
Using "DPI-adjusting key"
Backward and Frontward keys
Low-voltage alarming function
MT1073
EN
Right key
Scrolling
wheel
DPI-adjusting
key