Related Manuals for xG Technology CN1300
Summary of Contents for xG Technology CN1300
- Page 1 G7605 - Release 2.0...
- Page 2 Product features and specifications are subject to change without prior notice. xG® and xMax® are registered trademarks of xG Technology, Inc. All other trademarks used herein are property of their respective owners. For the latest product documentation and software updates, please refer to our Web site at www.xGTechnology.com/support...
- Page 3 Hazard ............................6 FCC Compliance ........................6 RF Exposure ..........................7 Connecting the CN1300 xMax 2.4 GHz Access Point to the xMax Network ....8 Connecting to the Internet ..................9 Wired Internet Connectivity ..................... 9 Connecting Wireless Devices....................9 Technical Specifications ....................
- Page 4 THIS PAGE INTENTIONALLY LEFT BLANK xMax 2.4 GHz Access Point - Quick Start Guide - G7605 - Release 2.0...
- Page 5 CN3200 routing modems, the CN1300 can participate in a wide-area mobile network supporting handoff. This manual provides basic instructions on using the CN1300 Access Point. It also describes how to connect to the xMax Network and then connect Internet-enabled wireless devices to the xMax Network.
- Page 6 These notices apply to the CN1300 xMax 2.4 GHz Access Point. Be sure to read, understand and follow these instructions. Heed all warnings. Only use accessories and attachments specified by xG Technology. Keep a copy of these instructions for future reference.
- Page 7 Changes or modifications to this device not expressly approved by xG Technology could void the user’s authority to operate the equipment and void the product warranty. xMax 2.4 GHz Access Point - Quick Start Guide - G7605 - Release 2.0...
- Page 8 IMPORTANT Before you begin this step, it is assumed that the CN1300 xMax 2.4 GHz Access Point has been configured as described in the CN1300 xMax 2.4 GHz Access Point Installation Guide. The configuration was completed by the device installer.
- Page 9 CN1300 xMax 2.4 GHz Access Point for Internet access. 1. Configure the device network interface for DHCP operation. 2. Using an Ethernet cable, connect the device to the LAN port on the CN1300 xMax 2.4 GHz Access Point Power Supply.
- Page 10 CN1300 SYSTEM OVERVIEW Frequency Band: 2.4 GHz Channel size: 5 / 10 / 20 / 40 MHz Modulation: Adaptive MCS0-MSC15 PHY Protocol: 2x2 MIMO 802.11n OFDM Raw Data Rate : Up to 300 Mbps RADIO PERFORMANCE Tx Power Output: 11 dBm to 23 dBm...
- Page 11 Resellers, and is not assignable or transferable to any subsequent purchaser or end- user. xG’s warranty applies only to a Product that is manufactured by or for xG Technology and is identified within xG’s price book at time of purchase . Any products not covered by xG’s warranty,...
- Page 12 Customer is responsible for shipment to xG (or authorized service provider) and assumes all costs and risks associated with this transportation; return shipment to the Customer will be at xG’s expense. Customer shall be responsible for return shipment charges for Product returned where xG determines there is no defect ("No Defect Found"), or for Product returned that xG determines is not eligible for warranty repair.
- Page 13 To obtain warranty service or technical support, please contact the party from whom you purchased the product. If you purchased the product directly from xG, contact your xG Sales Representative or call 754-206-4800. To take advantage of this Limited Warranty Purchasers are required to supply an original point of purchase receipt.
- Page 14 Technology, Inc. 240 South Pineapple Avenue, Suite 701 Sarasota, FL 34236 (941) 953-9035 © Copyright xG Technology, Inc. 2015. All Rights Reserved www.xGTechnology.com G7605 - Release 2.0...
Need help?
Do you have a question about the CN1300 and is the answer not in the manual?
Questions and answers