Safety Instructions - Kerbl Onyx 18180 Instructions For Use Manual

1. General instructions: The present operating and safety instructions are for the user. Please read the instructions
EN
carefully and thoroughly and take heed of the regulations before putting the device into operation!

2. Safety instructions:

• In the event of improper use of and tampering with the device, the warranty and liability of the manufacturer will be
rendered null and void. The voltage given on the name plate must correspond to the voltage of the power source.
• Damaged parts are only to be repaired by a specialist or by the manufacturer. Repairs done improperly can result in
accidents for the operator. Use only original parts for any eventual repairs.
• Before cleaning, rearranging or servicing the device always first pull the plug from the power source!
• Do not use the connection line to pull the plug from the power source or to carry the device. Take precautions that
the connection lines are not exposed to heat, oil or sharp edges. Damaged connection lines can cause fires, short-
circuiting and electric shocks. In the event that the connection line of this device gets damaged, it must be replaced
by a special connection line available from the manufacturer or from customer service.
• Always store your device securely, out of reach of children, and dry. Heed all possible maintenance regulations.
Check the device at regular intervals. Use only original spare parts and accessories.
• Never submerge the hair trimmer in water, never use a caustic solution. Clean the housing using only a cloth slightly
dampened with water or a mild soap solution.
• National and international safety, health and labor regulations are to be heeded.
How to use the
comb attachment
Blade adjustment ring
contrast list
0.8 = 0.8 mm
• = 1.1 mm
1.4 = 1.4 mm
• = 1.8 mm
2.0 = 2.0 mm
How to mount
and dismount the blade
• Blade taken-down:
Hold the handle of the hair trimmer fi rmly and push
the upper part of the blade away from the housing by
the arrow.
• Blade assembly:
1. To reassembly scaling at 2.0
2. Pushing the blade block until it
clicks fi rmly into position by the arrow
• Pushing the comb attachments
down
• To mount the comb attachments,
scaling at 0.8
Voltage of motor: DC 3V
Rated power: 3.5w
Speed of motor: 6900r/min
Recharge duration: 5 hours
Disposal in EU countries
Do not dispose of the appliance with domestic refuse. As part of the EU Direc-
tive governing the disposal of electric and electronic appliances, the appliance
is accepted free of charge by local waste collection points or recycling centers.
Correct disposal will ensure environment protection and prevent a potential
harmful impact on people and the environment.
5
• To remove the comb attach-
ment: push the attachment off
the trimmer body in the
indicated by the arrow.
Caution - Before using the
hair trimmer, lubricate the
blade with 2-3
drops of oil by the arrow.