Functional Description; Operation; Maintenance - Makita UB1100 Instruction Manual

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before adjusting or checking function on
the tool.
Switch action
CAUTION:
Before plugging in the tool, always check to see
•
that the switch trigger actuates properly and
returns to the "OFF" position when released.
For UB1100
1
004753
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
For UB1101
1
2
3
4
004754
To start the tool, simply pull the switch trigger. Tool
speed is increased by increasing pressure on the switch
trigger. Release the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
A speed control screw is provided so that maximum tool
speed can be limited (variable). Turn the speed control
screw clockwise for higher speed, and counterclockwise
for lower speed.
1. Switch trigger
2. Lock button
2
1. Switch trigger
2. Speed control
5
screw
3. Higher
4. Lower
5. Lock button

OPERATION

Blowing
1 2
004755
For dust blowing, attach nozzle to blower outlet, turning
clockwise to lock it in place.
Dust suction
2
1
004756
For dust suction, fit nozzle onto suction inlet and dust
bag onto blower outlet.
After the bag fills with dust, empty the contents of the
dust bag into a dust bin by releasing the fastener.
004757

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
4
1. Nozzle
2. Blower outlet
1. Dust bag
2. Blower outlet
3
3. Nozzle
4. Suction inlet
4
1. Fastener
1