Auto Burst (4 Modes) - GamerModz JUGGERNAUT Instruction Manual

Burst Mode allows you to set the number of shots fired with each trigger pull. Your GamerModz Juggernaut
Controller comes with 4 Settings for Burst Mode.
To enable Burst Mode - Rapid Fire must first be enabled (See Page 2 "Toggle Between Rapid Fire Modes") –
Hold Down the Right Trigger
Burst Mode below. Then Release the Right Trigger
corresponding to the mode selected, indicating that Burst Mode has been toggled on.
To disable Burst Mode Hold Down the Right Trigger
then Release the Right Trigger
been toggled off.
MODE 2 ----------------- X
MODE 3 ----------------- X
MODE 4 ----------------- X
MODE 5 ----------------- X
TURN OFF -------------- X
Notes:
You must have Rapid Fire Enabled to Enable Burst Mode. If Rapid Fire is not Enabled, Enabling Burst
Mode will fail.
Gameplay Tips:
Combine Burst Mode with a Weapon's Optimal Max Fire Rate to increase accuracy and save on Ammo.
BURST MODE
and Tap Right on the D-Pad
. The PS4 Controller LED will flash one time to indicate that Burst Mode has
, then
2
3
4
5
6
–
the number of times corresponding to the
. The PS4 Controller LED will flash the number of times
and Tap Right on the D-Pad
Mode #, then
X
2
ROUND BURST
3
ROUND BURST
4
ROUND BURST
5
ROUND BURST
DISABLE
BURST MODE
6 or more times,