Setting The Time - Sony Ericsson MBW-150 Handbook

4
Connect the charger to the charging
clip with the symbols on the charger
and clip connector facing the same
direction.
5
Wait approximately 2 hours or until the
battery icon indicates charging is
complete.

Setting the time

To set the time
•
Gently pull out the crown
rotate it to set the time. When the time
is set, push the crown back in until you
hear a click.
Pairing
Your watch has to be paired with your
phone before you can use it. Your
watch can only be paired with one
phone at a time. Start a new pairing
6 English
This is the Internet version of the User guide. © Print only for private use.
procedure to use the watch with
another phone.
Follow instructions in the phone User
guide on how to turn the Bluetooth
function on in the phone.
To pair your watch with a phone
1
Turn the Bluetooth function on in your
phone.
2
Turn Bluetooth visibility on in your
phone. This makes your phone visible
to other Bluetooth devices.
3
Press the bottom key on the watch
and repeatedly to select pairing mode
turn on pairing mode.
4
Press
appears in your phone. If
devices?
5. For some phones you may need to
enter a passcode. The default
passcode is 0000.
20 cm
(8")
, then press the right top key to
Yes when Add to my devices?
does not appear, go to step
Add to my