Advertisement
Aiming
There are 2 ways to set the correct aiming. When mounted on poles, it is recommend that for
best accuracy the aiming is done after the poles and floodlights have been erected and have
been allowed to settle into their installed position.
Method 1 – with inclinometer
1. Place markers, (visible from floodlight), at reference points according to lighting design.
2. To set the horizontal rotation (azimuth, this is generally set first):
a.
Slightly loosen/tighten the torque on the trunnion bracket bolt so the floodlight can be
rotated while the weight is still held securely.
b.
Unclip the plastic bolt head caps from the two side adjustment bolts (if necessary).
Slightly loosen/tighten the torque on the side bolts (19mm) so the floodlight can be
tilted while the weight is still held securely.
c.
Rotate in azimuth, and tilt up/down the elevation of the floodlight to enable the
sighting of the appropriate marker through one of the v-notch and post sights provided
at various locations on the housing (Fig 1). Other straight sides/edges/heat sinks can
also be used to line up the marker.
Fig 1
Page 8
Advertisement
