Table of Contents
Advertisement
Quick Links
Connection diagram
Speaker
Step
Connect the product to the switch hub and PC.
1
Prepare the product, your PC and
switch hub ready for connection.
Make sure that your PC has a LAN port
available for connection to the network cable of
the product.
2
Connect the product to the power
source (as shown in the figure).
Please connect with your power adaptor directly.
3
Connect the product to the switch
hub (as shown in the figure).
Use a network cable and plug it in the LAN port
of the product. Plug the other end of the cable in
the LAN port of the hub.
Megapixel IR IP Camera
ALC-9852/9852W
power
1. Please refer to user manual for more detailed
2. Where no switch hub is available, you can search and .
HUB
4
Connect the switch hub to your PC
(as shown in the figure).
5
Turn on the power.
Turn on the power of the PC and hub.
Attention
explanation of the hardware installation.
set up the camera using point-to-point link. However,
you may need a jumper and need to change
the LAN configuration on your PC for this purpose. It is
recommended to request a qualified engineer for the
connection or execute the network peering referring to
the user's manual
Quick Guide
High dB alarm
Alarm
HUB
Power
PC
HUB
Advertisement
Table of Contents
Related Manuals for Linking ALC-9852
Summary of Contents for Linking ALC-9852
- Page 1 Megapixel IR IP Camera Quick Guide ALC-9852/9852W Connection diagram High dB alarm Alarm Speaker Power Step Connect the product to the switch hub and PC. Prepare the product, your PC and Connect the switch hub to your PC switch hub ready for connection.
-
Page 2: Custom Level
Step Step Change the Internet Camera settings Explorer settings Start Execute the IP Finder.exe file from the supplied CD. Start Bring Up Your IE browser Find the camera (Search) Search for the product from your LAN. The factory IP setting 192.168.0.20 appears on the screen. Check Make sure that Level II, the commonly used default security level, is set for the security. - Page 3 Step Step Enter the Main Page Install Internet Explorer ActiveX piug-in Start Install ActiveX Open a new Internet Explorer window. When the username and password are confirmed, a control setup screen pops up under the IE address bar. Click “Install ActiveX Control” to install the controls. Enter the IP address and login Enter the new IP address and key in the username “root”...
- Page 4 Wireless Setting (Only for wireless model) Step Step Relocate camera Wireless Setting and final test Start After setting of Ethernet IP address, click on Network Unplugged Ethernet and select Wireless setting page. Unplug the cable on both camera and AP so that you can start to use wireless independently.
Need help?
Do you have a question about the ALC-9852 and is the answer not in the manual?
Questions and answers