Warranty; Introduction; Environmental Protection; Description Of Symbols - GMC TP2000 Instruction M

Dear Customer
If you require any help with your product, whether it is a
Warranty claim, spare part or user information:
Please phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia or 0800 445 721 in
New Zealand.

Introduction

Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
You will find your new tool easy and safe to operate, and,
with proper care, it will give you many years of
dependable service.
Caution. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.

Environmental protection

Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of in
an environmentally safe way.

Description of symbols

The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Conforms to relevant standards for
electromagnetic compatibility.

Specifications

Voltage:
Input power:
No load speed:
Cutter head:
Maximum planing width: 318mm
Minimum planing length: 125mm
Planing height:
Maximum depth of cut
per pass:
Automatic feeding speed: 8m/min
Blade size:
NOTE: This tool is an earthed appliance.
3
230 – 240V ~ 50Hz
2000W
8000RPM
48mm diameter with 2 blades
4.5mm – 160mm
3mm
319mm x 18.2mm x 3.2mm