INSTEON 75790 Owner's Manual page 14

Give your camera a user name and
password. This information is used
to secure your camera.
When ready, tap Next.
Disconnect the ethernet cable from
your camera and restart the camera by
disconnecting and then reconnecting your
camera's power cable.
If you do not disconnect the ethernet cable,
your camera will not switch to Wi-Fi.
Configure a Camera for Wi-Fi
iPhone, iPad and iPod touch
Tap Use Wi-Fi and select your network
from the list. If you don't see your
network, ensure that you've connected
the antenna to your camera.
To see your camera when you are away
from home, you will need to configure
manual remote access. Write down the
IP Address displayed at the bottom of the
screen and tap Next.
Enter your Wi-Fi network
password and tap Next
Name your camera, select an icon
and add it to a room.
14