MAC address: View your tablet's MAC address, needed for connecting to some
o
secured networks. (Not configurable.)
IP address: View your tablet's IP address. (Not configurable.)
o
WPS push button: Set up a connection to a WPS (Wi-Fi Protected Setup) router or other
l
equipment.
WPN PIN entry: View the PIN used by your tablet to set up a PIN-secured connection to a
l
Wi-Fi router or other equipment. (Not configurable.)
Help: Get help using Wi-Fi.
l
Wi-Fi Direct
Wi-Fi Direct allows devices to connect to each other directly via Wi-Fi, without a Wi-Fi network or
hotspot, and without having to set up the connection.
For information about using Wi-Fi Direct, see Wi-Fi Direct.
Hotspot
Use your tablet as an Internet Access Point (AP) using Hotspot. This allows other devices to connect
to the AP via a Wi-Fi network—giving the connected devices access to the Internet.
Connect a Device
1. Press
and then touch
2. Touch the ON/OFF switch to enable Hotspot.
3. On the target device, activate Wi-Fi. Then scan for Wi-Fi hotspots. Select the name of your table
to connect.
4. On your tablet, follow the prompts to connect the target device.
Bluetooth Settings
Bluetooth is a short-range communications technology that allows you to connect wirelessly to a
number of Bluetooth devices, such as headsets and hands-free car kits, and Bluetooth-enabled
handhelds, computers, printers, and wireless devices.
For more information about using Bluetooth, see Bluetooth.
1. Press
and then touch
2. Touch the ON/OFF switch to turn Bluetooth On. Bluetooth must be On to configure settings.
Settings
> Settings > Hotspot.
> Settings.
79