Use Your Product; Video; Far End Control; Starting The Video - Logitech PTZ PRO CAMERA Setup Manual

Logitech PTZ Pro Camera

Use your product

Video

• Starting the video: The video is controlled
by the application and will start once
the camera is selected and the video
is started in the application. An LED will
light when the video is streaming.
• Pan and tilt the camera using
the controls on the remote control.
Press once for incremental or press
and hold for continuous pan or tilt.
Caution: Do not manually rotate webcam
head. Doing so may damage unit.
• Zoom the camera up to 10X by pressing
the zoom button.
• Home: Select the Home button to return
the default, out-of-box home position.
• Camera Presets: You can set up to 3
Camera Preset positions. First, position
the camera using the remote control, and
then press and hold one of the Camera
Preset buttons for 3 seconds to save that
position. You may return to your defined
6 English
position at any time by pressing the
Preset button once.
Use Preset 1 as your own defined
"home" position. When the camera is
reconnected to the PC, it will return to
the position set in Preset 1. If no position
is set for Preset 1, the camera will return
to the default home position.
All three Presets are by default set to the
out-of-box home.
• Far end control: By selecting this key
and downloading the application from
www.logitech.com/support/ptz, you
may control the pan, tilt and zoom of
any Logitech ConferenceCam product
or C930e Webcam in supported
applications. Camera selection and pan,
tilt and zoom tools are also available from
the downloadable application for PC
as well as ability to disable this feature
locally. Please visit the download page
listed for more information.