D-Link AC1750 User Manual page 24

Section 2 - Installation
4. Connect the supplied power adapter to the router and a power outlet, press the power button, and wait approximately
one minute until the LED indicator on the front of the device changes from orange to solid white.
Note: This unit is to be used with power supply model DA-60N12.
5. Connect wired devices to the LAN ports on your DIR-869. Connect wireless devices to the Wi-Fi network printed on
the included Wi-Fi Configuration Card. You can also find the Wi-Fi network names and passwords printed on the label
attached to the bottom your DIR-869.
Wired and Wireless Devices
8. No further configuration is necessary, but if you wish to adjust the default settings, proceed to Access Point - Extender
Mode on page 31.
D-Link DIR-869 User Manual
DIR-869
Access Point Mode
DIR-869
Access Point Mode
Existing Broadband
Router Connection Device
(e.g. DSL/Cable Modem)
Existing
Router
Internet
Broadband Internet
Connection Device
(e.g. DSL/Cable Modem)
20