Hardware Setup; Router Mode - D-Link AC1750 User Manual

Section 2 - Installation
1. Turn off and unplug the power and Ethernet cable to your cable or DSL broadband modem. This is required. In some
cases, you may need to turn it off for up to five minutes.
2. Inspect the mode switch to ensure that it is in the factory default ROUTER position. Adjust the switch if necessary.
3. Position your DIR-869 near your Internet-connected modem. Place it in an open area for better wireless coverage.
D-Link DIR-869 User Manual

Hardware Setup

Router Mode

Modem
DIR-869
DIR-869
16