Video Recording; Snapshot; Taking Pictures; Separate Sound Recording - Pyle PPBCM10 User Manual


Delay record: press "Up" key or "Down" key to select switch, press "OK" key to
confirm the switch selected.

After the settings are selected and finished, press the "BACK" key to enter boot
state and preview it.

5. Video recording

5.1 Video recording
While it is powered on and in the preview screen, press the "Video" key to start recording.
In recording mode, the top left corner shows a red LED light indicator; it will begin to flash
slowly when it is recording. Press the "video" key again to stop recording (LED light indicator
returns to a green color). Video files are saved automatically to your SD memory card. The screen
will return back to the preview screen. The name of the video will be the current date and time
with "MP4" as the suffix saved on your memory card. Refer to the "Check out/Playback" button
to check your recorded video.

5.2 Snapshot

While shooting video, press the "Photo" key【
automatically. Snapshots will not interrupt recording video.

6. Taking pictures

While in the preview screen, press the "Photo" key【
automatically). There will be a picture taking sound to indicate a photo has been taken. Press the
"Photo" key【
】once will take a photo. The name of the photo consists of the date and time
with a "JPG" as the suffix saved on the memory card. Refer to the "Check out/Playback" button to
check the photo.

7. Separate sound recording

In the preview screen, press the "Audio" button to start a separate sound recording. The
screen will be blue with the word "recording" in the middle. The LED light indicator is yellow.
Press "Audio" again to stop the separate sound recording. The LED light indicator will turn back
to green. The audio file is saved in the SD memory card automatically.
】to take photos which will save
7
】to take a photo (saves