At+Ip - CipherLab 8000 GPRS Cradle Reference Manual

4.2.15 AT+IP

Read Command
AT+IP?<CR>
Example
AT+IP?
192.168.1.2
Write Command
AT+IP=[IP]<CR>
Example
AT+IP=192.168.2.100
OK
AT+IP=192.168.8
ERROR
Remarks
The Read command is to get the fixed IP address of the cradle.
The Write command is to set the fixed IP address of the cradle.
[IP] is a string in dot-decimal for IP address xxx.xxx.xxx.xxx
See Also
AT+DHCP (GPRS)
Back to the Supported AT Commands.
Chapter 4 Programming Your Mobile Computer
Response
<CR><LF>[IP]<CR><LF>
The fixed IP assigned to the cradle is
192.168.1.2
Response
<CR><LF>OK<CR><LF>
<CR><LF>ERROR<CR><LF>
Assign 192.168.2.100
successfully.
The dotted-decimal notation is incorrect!
to the cradle
43