Table of Contents
Advertisement
4.2.13 AT+DOWNLOAD
Execution Command
AT+DOWNLOAD<CR>
Example
AT+DOWNLOAD
OK
Remarks
This command is to upgrade firmware, either downloading a user program or kernel program to
the cradle. After replying with the message "OK", the cradle will enter the Download Mode.
The two LEDs to the right of the front panel (Tx/Rx and Link) will flash by turns to indicate the
cradle is ready, and will flash simultaneously while downloading.
See Also
AT+KVER, AT+VER
Back to the Supported AT Commands.
Chapter 4
Programming Your Mobile Computer
Response
<CR><LF>OK<CR><LF>
41
Advertisement
Table of Contents
