Switching Off The Appliance - Beem Comfort de Luxe User Manual

Comfort de Luxe
Restarting after
interruption
During an interruption in operation, con-
densation can form in the steam hose.
When restarting, allow the condensa-
‹
tion to escape first. Direct the steam
spray gun towards a cloth and press
the steam switch. When steam flows
out steadily, cleaning can be contin-
ued,

Switching off the appliance

Switch off the appliance by pressing the
‹
on/off switch (4). The power indicator
light extinguishes.
Press down the steam switch (31) un-
‹
til steam is no longer discharged.
After using
Allow the appliance to cool down com-
‹
pletely.
Detach all accessories.
‹
To remove the steam hose, simulta-
‹
neously press the two buttons on the
side of the connector and pull out the
steam hose.
Open the tank and empty it.
‹
Allow the tank to dry completely.
‹
Close the tank again with the tank
‹
cap.
Lock the steam switch.
‹
34
Using the accessories
Steam spray gun
You can also use the appliance without
accessories:
■ Remove dust from plants,
■ Damp dusting.
Spot spray nozzle (images C1-C5)
The closer you hold the nozzle to the dirty
surface, the better the cleaning effect
since the temperature and steam pressure
are at their highest directly at the nozzle
outlet.
The spot spray nozzle can be used with
the following attachments:
■ Crevice nozzle,
■ Round brushes with metal bristles,
■ Round brushes with plastic bristles.
For optimum deployment, use the brushes
as follows:
Use the crevice nozzle to clean cor-
‹
ners and locations that are difficult to
access (image C1).
Both the round brushes with metal
‹
bristles and the round brushes with
plastic bristles are suitable for cleaning
joints (images C2 and C3).
Steam very dirty areas thoroughly and
‹
allow them to soak for a while. This
enables the dirt to be removed more
easily (image C4).
BEEM - Elements of Lifestyle
EN