Table of Contents
Advertisement
Moving and Resizing AF Frames (1-point AF)
When you want to change the position or size of the AF frame, set the AF
method to [1-point AF].
1
Move the AF frame.
Touch the screen. An AF frame is
z
displayed in orange where you touched
(Touch AF).
To return the AF frame to the original
z
position in the center, press the [
button.
2
Resize the AF frame.
To reduce the AF frame size, turn the
z
[ ] ring. Turn it again to restore it to the
original size.
3
Finish the setup process.
Press the [
z
●
AF frames are displayed at normal size when you use the digital
zoom ( = 39) or digital tele-converter ( = 83), and in manual
focus mode ( = 81).
●
You can also link the Spot AE Point frame to the AF frame
( = 75).
●
You can also configure the AF frame size by pressing the
[
] button and choosing [AF Frame Size] on the [
( = 29).
Still Images
Movies
+Tracking
●
Detects people's faces, and then sets the focus, exposure (evaluative
metering only), and white balance ([
●
After you aim the camera at the subject, a white frame is displayed
]
around the person's face determined by the camera to be the main
subject, and up to two gray frames are displayed around other
detected faces.
●
When the camera detects movement, frames will follow moving
subjects, within a certain range.
●
After you press the shutter button halfway, up to nine green frames are
displayed around faces in focus.
] button.
3] tab
●
On the screen in step 2, you can also move the AF frame by
touching the screen, restore the AF frame to the original position
by touching [
], or exit the setting by touching [
Still Images
] only).
●
When no faces are detected, or when only gray frames are
displayed (without a white frame), pressing the shutter button
halfway will display green frames in the areas in focus. Note that
the maximum number of frames depends on the aspect ratio
( = 47) setting.
If no faces are detected in Servo AF ( = 85) mode, the AF
●
frame is displayed in the center of the screen when you press the
shutter button halfway.
●
Examples of faces that cannot be detected:
-
Subjects that are distant or extremely close
-
Subjects that are dark or light
-
Faces in profile, at an angle, or partly hidden
●
The camera may misinterpret non-human subjects as faces.
●
No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
Before Use
].
Basic Guide
Advanced Guide
Movies
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
84
Hide quick links:
Advertisement
Table of Contents
