Shark HV300EU Owner's Manual page 30

TROUBLE-
Vacuum is not picking up dirt. No suction or light suction.
SHOOTING
• Check filters to see if they need cleaning. Follow instructions for rinsing and drying the filters before re-inserting back into the vacuum.
GUIDE
• Dust cup may be full; empty dust cup.
• Check tube, tube connections, nozzles and accessories for blockages; clear blockages if required.
Vacuum lifts area rugs
• Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.
• Turn off the unit to disengage the brush roll and restart with the POWER button.
Brush roll does not spin
• Immediately turn off and unplug vacuum, disconnect the nozzle and remove blockage before reconnecting and turning vacuum back on.
• This vacuum is equipped with a thermal shut down safety feature in the event that your vacuum over heats. If your vacuum does shut down, slide the POWER switch
to the "O" position and unplug the unit. After about 30 minutes, your vacuum should be ready to operate again. Plug in the power cord and turn the unit on to begin
vacuuming again.
Shark, and Shark Rocket are trademarks of SharkNinja Operating
LLC. All other brand names may be trademarks of their respective
owners.
3 0
w w w . s h a r k c l e a n . e u