Getting Started; Preparing To Use Your Sbh54; Reconnecting The Headset - Sony SBH54 User Manual

Getting started

Preparing to use your SBH54

You can set up your Stereo Bluetooth® Headset using NFC, which launches the
pairing, connection and setup procedures automatically, or you can use the manual
Bluetooth® option to set up the device manually.
For your SBH54 to work properly, make sure the SBH54 application is installed on
your Android™ device.
To set up your SBH54 using NFC
1
Make sure that your SBH54 is fully charged.
2
Android™ device: Make sure that the NFC function is turned on and that the
screen is active and unlocked.
3
Place the Android™ device over your SBH54 so that the NFC detection area of
each device touches the other, then follow the instructions on the Android™
device to install the SBH54 application.
You can set up your SBH54 using NFC even when it is turned off. The SBH54 gets turned on
when the NFC detection area is touched by another NFC device. If you have problems pairing
your SBH54 with an Android™ device using NFC, try to connect manually using Bluetooth®.
To set up your SBH54 using Bluetooth®
1
Make sure that your SBH54 is fully charged.
2
Android™ device: Make sure the Bluetooth® function is turned on.
3
Turn off your headset.
4
Headset: Press and hold down
5 Android™ device: Scan for Bluetooth® devices, then select SBH54 in the list of
available devices.
6 Android™ device: Follow the pairing instructions that appear on the screen.

Reconnecting the headset

In cases where a connection gets lost, for example, when the connected Android™
device goes out of range, your headset automatically performs a series of
reconnection attempts. When this happens, you can use any key to force the
accessory to try reconnecting, or you can use NFC to reconnect the two devices.
To force the headset to try reconnecting
1
Android™ device: Make sure that the Bluetooth® function is turned on.
2
Press any key on the headset.
To reconnect your headset using NFC
1 Android™ device: Make sure that the NFC function is turned on and that the
screen is active and unlocked.
2
Place the Android™ device over your headset so that the NFC detection area
of each device touches the other.
This is an Internet version of this publication. © Print only for private use.
until the Bluetooth® icon appears.
8