Precautions - Optoma EX785 Manual

Usage Notice

Precautions

▀■ Warning - Do not look into the projector's lens when the lamp is
▀■ Warning - To reduce the risk of fire or electric shock, do not
▀■ Warning - Please do not open or disassemble the projector as this
▀■ Warning - When replacing the lamp, please allow unit to cool down,
▀■ Warning - This projector will detect the life of the lamp itself. Please
When the
lamp reaches
the end of its
life, the
projector will
▀■ Warning - Use the "Lamp Reset" function from the on-screen display
not turn back
on until the
lamp
module has
▀■ Warning - When switching the projector off, please ensure the
been replaced.
To replace the
lamp, follow
the procedures
listed under
"Replacing the
▀■ Warning - Do not use the lens cap when projector is in operation.
Lamp" section
on page 69.
▀■ Warning - When the lamp is approaching the end of its life, the
▀■ Warning - To reduce the risk of injury to the eyes, do not look directly
English
4
Please follow all warnings, precautions and
maintenance as recommended in this user's
guide.
on. The bright light may damage your eyes.
expose this projector to rain or moisture.
may cause electric shock.
and follow all replacement instructions. See pages 69.
be sure to change the lamp when it shows warning
messages.
"Options|Lamp Setting" menu after replacing the lamp
module (see page 53).
cooling cycle has been completed before disconnecting
the power. Allow 90 seconds for the projector to cool
down.
message "Lamp is approaching the end of its useful
life" displays on the screen. Please contact your local
reseller or service center to change the lamp as soon
as possible.
into the laser beam on the remote control and do not point
the laser beam into anyone's eyes. This remote control is
equipped with a Class II laser that emits radiation.