Additional Information - Panasonic Viera TX-32CR410 Operating Instructions Manual

Additional
Information
Auto power standby function
The TV will automatically go into Standby mode in the
following conditions:
●
[Off Timer] is active in the [Timer] menu (p. 15).
●
No operation is performed for the period selected in
[Auto Standby] (p. 15).
Information banner
Example : DVB
1 2 3 4
4 4 Coronation Street
20:00-21:00
BBC BBC
◄ Now ►
1
Channel position and name
2
Programme details
3
Channel type ([Radio], [Data], etc.) /
Encrypted channel (
4
Programme
5
Programme Start / Finish time (DVB)
Channel number, etc. (Analogue TV)
6
Programme progress indicator (DVB)
7
Input signal
8
Current time
Icon / Message Meaning
Sound mute On
[Encrypted] Scrambled programme
Dolby Digital Plus or Dolby Digital
[Dolby Digital]
audio track
STTL Subtitle service available
TTX Teletext service available
[Stereo], [Dual],
Audio mode
[Mono]
1 - 90 Off Timer remaining time
■
To display extra information (DVB)
INFO
(Press again to hide the banner.)
5 6 7
576i SD
English Stereo g
Info
)
Aspect
■
[Auto]
The best ratio is selected automatically according to
the "Aspect Control Signal"
■
[16:9]
Directly displays the image at 16:9 without distortion
(anamorphic).
■
[14:9]
Displays the image at the standard 14:9 without
distortion.
■
[Just]
Displays a 4:3 image full-screen. Stretching is only
noticeable at the left and right edges.
■
[4:3]
Displays the image at the standard 4:3 without
distortion.
■
[4:3 Full]
Displays a 4:3 image enlarged horizontally to fit the
8
screen.
20:05
– For HD (High definition) signals only
■
[Zoom1]
Displays a 16:9 letterbox or 4:3 image without
distortion.
■
[Zoom2]
Displays a 16:9 letterbox (anamorphic) image full-
screen without distortion.
■
[Zoom3]
Displays a 2.35:1 letterbox (anamorphic) image full-
screen without distortion. At 16:9, displays the image at
its maximum (with slight enlargement).
Note
●
Aspect is fixed to [16:9] when [Viewing Mode] is set to
[Game] in the [Picture] menu.
Aspect Control Signal
Programmes usually contain "Aspect Control Signal"
(Widescreen signal, Control signal through SCART /
HDMI terminal).
In [Auto] mode, the aspect will switch to the appropriate
ratio if a Widescreen signal (WSS) or a Control signal
through SCART (pin 8) / HDMI terminal is detected.
■
Available conditions for the Widescreen signal
(WSS)
Input terminal
Cable
Terrestrial
AV1
AV2 (Composite)
AV2 (Component)
Note
●
If the screen size looks unusual when a widescreen-
recorded programme is played back on a VCR, adjust
the tracking of the VCR.
(p. 19)
Input signal format
DVB-C
DVB-T
PAL B, G, H, I, D, K
SECAM B, G, L, L', D, K
PAL
SECAM
625 (576) / 50i, 50p
19