Assigning Address To Indoor Unit - Samsung EH052EAMC Installation Manual

Assigning Address to Indoor Unit

24
E-
DB98-27157A(1)_E.indd 24
1
Before installing the indoor unit, assign an address to the indoor unitac-
cording to the air conditioning system plan..
2
The address of the indoor unit is assigned by adjusting MAIN(SW02)
andRMC(SW04) rotary switches.
SW02
K1 K2 K3 K4
K5 K6 K7 K8
K9 K10 K11 K12
SW05 SW06
3
It is required to set the RMC address if you install the wired remote control-
lerand/or the centralized controller.
4 If you install optional accessories such as the wired remote controller, cen-
tralizedcontroller, etc. see an appropriate installation manual.
5 If an optional accessory is not installed, you do not have to set the
RMCaddress. However, adjust K1 and K2 switches of the SW05 DIPswitch
to "ON"position in this case.
SW02 SW04
SW05 SW06 SW07
SW04
SW07
2007-1-23 13:06:54