Installing Pc/104 Modules - PCM -5820 Series User Manual

D.1 Installing PC/104 modules
The PCM-5820 Series' PC/104 connectors give you the flexibility
to attach PC/104 modules.
Installing these modules on the PCM-5820 Series is quick and simple.
The following steps show how to mount the PC/104 modules:
1. Remove the PCM-5820 Series from your system, paying
particular attention to the safety instructions already mentioned
above.
2. Make any jumper or link changes required to the CPU card
now. Once the PC/104 module is mounted you may have
difficulty in accessing these.
3. Normal PC/104 modules have male connectors and mount
directly onto the main card. (Refer to the diagram on the
following page.)
4. Mount the PC/104 module onto the CPU card by pressing the
module firmly but carefully onto the mounting connectors.
5. Secure the PC/104 module onto the CPU card using the four
mounting spacers and screws.
100 PCM-5820 Series User's Manual