Advertisement
Important Safeguards
15. Do NOT install in a room that is lower than 55° F.
16. Avoid the use of an extension cord. If it is absolutely necessary to use an
extension cord, the marked rating must be equal to or greater than the rating of
the appliance. Only use a 3-wire extension cord with a 3-blade grounding plug.
3-Prong Plug
This appliance has a 3-prong plug for use in a 3-prong (grounding) outlet to mini-
mize the possibility of electric shock. This appliance should only be used with a
120V, 60Hz grounded outlet. Failure to follow these instructions could result in fire,
electrical shock, serious injury or death.
If the plug does not fit fully in the outlet, contact a qualified electrician to install a
3-prong (grounding) outlet. Do not attempt to modify the plug in any way. Failure to
follow these instructions could result in fire, electrical shock, serious injury or death.
Parts & Features
Interior
Light
Glass
Shelves
Chrome
Wire Rack
Adjustable Leveling Legs
4
4
(cont'd)
Tinted
Double Pane
Glass Door
Stationary Drip Tray (Not Shown)
Wards.com
1. After unpacking, dispose of all packing materials in accordance with local
ordinances.
2. Position the beverage center on a solid, level surface. Use the leveling legs to
adjust level, if necessary. Turn the leveling legs clockwise to lower the unit or
counterclockwise to raise.
3. Beverage center should have a minimum of 2 inches of clearance around the
entire unit to allow for adequate ventilation.
4. Allow the unit to sit upright and undisturbed for 8 hours before plugging in.
5. After the unit has settled for 8 hours, plug the unit into an outlet that is
approved for the voltage listed on the rating plate. A beep will sound.
6. The LCD will display the factory default temperature setting of 46° F for the
internal temperature of the appliance.
Control Panel Settings
To access the control panel settings, press and hold the Lock/Unlock button for
three seconds. A beep will sound.
Interior Light:
Turn on the interior light by pressing the Lock/Unlock button. The interior light will
not activate when the control panel is locked.
Temperature Controls:
Adjust the temperature setting by pressing the up and down arrow buttons. The
temperature range is 40° F - 61° F and will increase/decrease one degree at a time.
Once the desired temperature has been reached, press the Lock/Unlock button.
NOTE: The control panel automatically locks after 30 seconds of inactivity.
Control Panel
Lock/Unlock/Light
Temperature
Decrease/Colder
Installation
Temperature
Increase/Wamer
LCD/Temperature
Display
1
888
557
3848
•
•
•
5
Advertisement
