Table of Contents
Advertisement
Controls and Fuctions
1. Corner roller bumpers:
2. Rear tires:
Non-marking and extra wide tires for stability.
3. Rear transaxle:
Provides propulsion for machine.
4. Spring adjustment knob:
The actuator lifts and lowers the deck.
5. Actuator:
6. Central command box:
Used to steer the machine.
7. Handle bar:
The machine comes standard with (3) 12 volt batteries (Standard) or (Optional) (6) 6 volt batteries
8. Batteries:
Provides access to batteries for charging and maintenance.
9. Battery access lid:
10. Shroud:
The shroud contains dust created from burnishing.
11. Shroud curtain:
The shroud curtain contains dust created from burnishing.
12. Casters:
Twin casters for stability.
The clean air intake allows clean air to flow into the burnishing motor.
13. Clean air intake:
14. Clean air intake hoses:
15. Burnisher motor cover:
This motor drives the burnishing pad driver.
16. Burnisher motor:
Burnishes floor
17. Burnisher pad:
Holds burnisher pad to pad driver.
18. Pad retainer clip:
The machine tips back to allow easy access to burnisher pad installment and removal
19. Tip back bar:
20. Speed control knob:
21. (+) 15 amp resetable circuit breaker:
Turns power to machine on and off.
22. Key switch:
23. Resetable 65 amp burnisher motor circuit breaker:
24. Burnisher deck switch:
25. Burnishing deck pressure gauge:
26. Burnishing motor brush indicator:
Keeps track of how many hours are on the machine.
27. Hour meter:
28. Battery gauge:
Indicates relative battery charge remaining.
29. Reverse switch:
Controls the direction of the traction motor.
30. Green control button:
See figures (1-6) on page 7
helps prevent damage to machine when cleaning close to walls and other objects.
Increases or decreases the pad pressure.
Holds all electrical switches and control components.
The clean air intake hoses direct clean air into the burnishing motor.
Prevents dust from entering the burnisher motor prolonging motor life.
Controls the drive speed of the machine, turn clockwise to increase speed and
couter clockwise to decrease speed.
(15 amp) positive bus bar.
Lowers burnisher deck.
Settings green (safe operating range) - red (overload).
Indicates when the burnisher motor needs new brushes.
Depress to drive the machine forward and release to stop
Prevents motor damage do to too much down pressure
PAGE 8
Advertisement
Table of Contents
