Connecting The Mediamaster; About The Scart Socket; Preparing The Remote Control - Nokia 110T Mediamaster User Manual

Connecting the Mediamaster

The box for your Mediamaster should contain the following items:
• the Mediamaster
• a remote control with 2 AAA batteries
• a SCART cable (fully connected; 1.0 m)
• an RF cable
• a User Guide and a software license agreement
• a separate power supply

About the SCART socket

The rear panel of the Mediamaster is equipped with a SCART socket
(see picture). When you connect other devices to this socket, always
use a fully connected SCART cable like the one supplied. SCART
cables are available that do not have all the pins connected, which
could reduce picture quality if you were to use them.

Preparing the remote control

• Remove the cover from the battery compartment at the bottom
of the remote control.
• Insert the 2 AAA (1.5 V) batteries as shown in the diagram, taking
care to observe the + and - markings indicated inside.
• Replace the cover.
GB 6
SCART cable
Remote control
SCART socket
RF cable
Power supply