Operating Safety - Qualcast Q1W-SP16-1900 Original Instruction Manual

1900w high pressure washer
Table of Contents

Advertisement

Safety Information
Important - Please read these instructions fully before operating or maintaining
Operating Safety (continued)
- Water that has lown through backlow preventers is considered to be non-potable.
- The PVC or polychloroprene sheathed power cord, or extension cables (H05VV-F) are
O
acceptable for use at temperatures at or above 0
C.
- Always ensure that a machine which has been switched off and cannot be restarted
unintentionally.
- Only use hoses, ittings and couplings supplied and recommended by the manufacturer.
- Never carry the equipment by the cable or the hose. Do not carry the equipment with your
inger on the On/Off switch when it is connected to the mains.
- Remove the plug from the plug socket if you are not using the equipment, when transporting it
or when it is left unattended, when checking the equipment, cleaning it or removing blockages,
when undertaking maintenance work or changing accessories, if the power or extension cable
is damaged, after contact with foreign bodies, or in the event of abnormal vibration.
- Do not use the equipment near lammable liquids or gases. In case of non-observance, there
is a risk of ire of explosion.
- Do not use the pressure washer if a supply cord, safety devices, hoses, switch or trigger gun
is damaged.
- If an extension cord is used, the plug and socket must be of watertight construction.
Inadequate extension cords can be dangerous.
- Ensure that the mains voltage matches the information on the label.
- Before each use, check the equipment, power cable and plug for damage, avoiding an
electrical shock.
- Damaged cables, coupling and plugs or connecting leads that are not compliant with
speciications are not to be used. Remove the plug from the plug socket immediately in case of
damage or cutting through of the mains cable.
- Do not use the equipment when the switching action of the On/Off switch is impaired. Have
damaged switches replaced at our Service Centre.
- Do not overload your equipment. Work only within the indicated range of performance. For
heavy work, do not use a machine with insuficient power. Do not use your equipment for
purposes other than those speciied.
Customer Helpline 01904 727500
www.gardenservicecentre.co.uk

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents