Nokia 12 GSM MODULE REMOTE I/O Control Manual page 40

Table 10. Output_Set X commands
Command Type Command
Output_Set X On
Response:
The X refers to output pin number, X=1,2,3,4,5,6,7,8,9.
Output_Set X Off
Response:
The X refers to output pin number, X=1,2,3,4,5,6,7,8,9.
Output_Set All On
Response:
Output_Set All Off
Response:
term123 Output_Set X On
OUTPUT_SET Z ON: OK
OUTPUT Z: ON
term123 Output_Set X Off
OUTPUT_SET X OFF: OK
OUTPUT X: OFF
term123 Output_Set All
On
OUTPUT_SET ALL ON: OK
OUTPUT 1: ON
OUTPUT 2: ON
OUTPUT 3: ON
OUTPUT 4: ON
OUTPUT 5: ON
OUTPUT 6: ON
OUTPUT 7: ON
OUTPUT 8: ON
OUTPUT 9: ON
term123 Output_Set All
Off
OUTPUT_SET ALL OFF: OK
OUTPUT 1: OFF
OUTPUT 2: OFF
Comments
The command sets
output pin X to ON state
and the response returns
the state of it
The command sets output
pin X to OFF state and the
response returns the state
of it
The command sets all
outputs to ON state and
the response returns the
state of all outputs
The command sets
all outputs to OFF
state and the
response returns the
state of all outputs
36/49