Inverting Outputs - Nokia 12 GSM MODULE REMOTE I/O Control Manual

Nokia 12 gsm module remote i/o control guide
Table of Contents

Advertisement

9.3.6

Inverting Outputs

Use the Output_Invert X commands to invert digital output states. The
state of an output can be changed without knowing its previous state. Note that
all example control messages in this chapter use the "term123" identifier string
and the password property is set off (see Table 11).
Table 11. Output_Invert X commands
Command Type
Output_Invert X
Output_Invert All
OUTPUT 3: OFF
OUTPUT 4: OFF
OUTPUT 5: OFF
OUTPUT 6: OFF
OUTPUT 7: OFF
OUTPUT 8: OFF
OUTPUT 9: OFF
Command
term123 Output_Invert X
Response:
OUTPUT_INVERT X: OK
OUTPUT X: Y
The X refers to output pin number, X=1,2,3,4,5,6,7,8,9.
The Y refers to either ON or OFF
term123 Output_Invert
All
Response:
OUTPUT_INVERT ALL: OK
OUTPUT 1: X
OUTPUT 2: X
OUTPUT 3: X
OUTPUT 4: X
OUTPUT 5: X
OUTPUT 6: X
Comments
The command inverts
output pin X to
opposite state.
The command inverts
all output pins to
opposite state.
37/49

Advertisement

Table of Contents
loading

Table of Contents