Additional Safety Rules - Makita 6903VD Instruction Manual

ADDITIONAL SAFETY RULES
FOR CHARGER & BATTERY CARTRIDGE
1.
Do not charge Battery Cartridge when temperature
is BELOW 10°C (50OFI
or ABOVE 4OoC (104OF).
2.
Do not attempt t o use a step-up transformer, an engine generator or DC power
3.
Do not allow anything t o cover or clog the charger vents.
4. Do not short the battery cartridge:
receptacle.
(1) Do not touch the terminals w i t h any conductive material.
(2) Avoid storing battery cartridge in a container with other metal objects such
(3) Do
not expose battery cartridge t o water or rain.
as nails, coins, etc.
A battery short can cause a large current flow, overheating, possible burns
and even a breakdown.
5.
Do not store the tool and Battery Cartridge in locations where the tempera-
6. Do
not incinerate the Battery Cartridge even if it is severely damaged or is
ture may reach or exceed 5OoC (122OF).
completely worn out. The battery cartridge can explode in a fire.
ADDITIONAL SAFETY RULES
1. Be aware that this tool is always in an operating condition, because
it
does
2. Wear ear protectors.
3.
Hold the tool firmly.
4. Always be sure you have a firm footing.
Be sure no one is below when using the tool in high locations.
5. When driving into walls, floors or wherever "live"
electrical wires may be
encountered,
DO
NOT TOUCH ANY METAL PARTS
OF
THE TOOL!
Hold the tool only by the insulated grasping surfaces t o prevent electric shock
if you drive into a "live" wire.
not have t o be plugged into an electrical outlet.
SAVE THESE INSTRUCTIONS.
5