Panasonic NV-FJ631EG Service Manual page 20

www.freeservicemanuals.info
Press the "4" key on the remote controller.
(Confirm that TW6002 becomes high(5V)).
Adjust the Frequency response by pressing the
"2"(increase) and/or "8"(decrease) key on the
Remote Controller. (See Fig.E2)
Store the Adjusted value by pressing the "5" key on
the Remote Controller.
Release the Service mode by pressing the EJECT
and FF keys simultaneously in 6 times until the FIP
becomes normal indication.
3.3.7. LOCATION OF TEST POINTS & CONTROLS
3.3.8. CIRCUIT BOARD LAYOUT
PROCEDURES
Fig. E5
10/16/2012
FIP DISPLAY
20
World of free manuals
www.nostatech.nl