Setup Mode - GoPro Hero+ User Manual

/ Settings
SPOT METER
This setting applies to all photo capture modes: Photo, Burst,
and Time Lapse. Spot Meter is good for capturing photos where
the lighting is different from where you are, such as capturing the
outdoors from within a car or capturing a shaded environment while
standing in the sun. Spot Meter automatically sets the exposure based
on a single spot in the middle of the image, rather than on the entire
frame. When Spot Meter is turned on, [
display. The options for this setting are Off (default) and On.
Note: Changes that you make to the Spot Meter setting in one mode (Photo, Burst, or Time Lapse)
apply only to that mode. To adjust this setting for another mode, adjust the setting within that mode.
34
] appears on the camera
In Setup mode, you can change settings that apply to all camera
modes. For instructions on how to change the following settings,
see Navigating Settings Menus (page 17).
WIRELESS
When wireless is on, a wireless status icon appears on the
camera status screen and the blue wireless lights blink
intermittently.
Setting Description
Off (default)
Camera connects to the GoPro App. For
GoPro App instructions on connecting to this app, see
Connecting to the GoPro App (page 25).
Camera connects to the GoPro remote
REM CTRL control (sold separately). For instructions on
pairing, see the user manual for the remote.
Resets your camera's wireless name and
RESET Wi-Fi
password to the defaults.

/ Setup Mode

35