Setting Up The Monitor Set; Attaching The Stand Base - LG 32MP58HQ Owner's Manual

Setting up the Monitor set

Attaching the Stand Base

1
Please put a soft cloth on a low table or box
1
to protect the screen of the monitor.
Please put the monitor on the soft cloth with
2
the screen facing down.
2
Please grab the Stand body in one hand, and
push it in the direction of the arrow to hinge
body.After assembling, you must check if the
Stand body latched in or not.
3
1
2
4
Please set the Monitor upright, and install the
necessary cable.
Stand body
* Must use one type input cable. Don't use
more than two types cable together.
ASSEMBLING AND PREPARING
Please push the Stand Base in the direction
of the arrow as shown below and assemble
together.
Please use a driver(-) or coin to insert thumb
screw and turn right arrow direction lock.
* It is necessary to thoroughly tighten it with
Thumb Screw, or the monitor will shake.
9
Stand Base