Table of Contents
Advertisement
SAFETY AND OPERATING PRECAUTION
Important Information:
This symbol indicates the presence of dangerous voltage within the product
enclosure that presents the risk of electric shock injury. When this symbol
appears next to an operation discussed in this manual, only qualified
technical personnel should perform that operation
.
This symbol indicates important operating or maintenance instructions that
should be read carefully. Failure to observe these instructions could result in
damage to the product or other property.
WARNINGS:
To reduce the risk of electric shock injury, do not remove the top cover or rear
panel. Uninsulated dangerous voltage exists within the product's enclosure.
Refer servicing to qualified personnel
Do not defeat the earth ground connection in the AC power cable.
Do not operate this unit in the presence of rain, liquids or condensing moisture. Liquid
entering the product enclosure presents the risk of electric shock injury. Do not touch
the AC plug or enclosure with wet hands.
Do not defeat intended AC power connection polarization.
Do not use a damaged or excessively worn cord to connect this unit to AC power.
CHECK LINE VOLTAGE SETTING
The VTP-100 has been set from the factory to operate at the voltage required for
your part of the world. However, it's important to double-check this in order to ensure no
damage will come to the unit if power is applied while the setting is incorrect.
CAUTIONS:
Severe damage may be caused to your unit
if it
is connected to an
230VAC/50Hz
AC power if the voltage switch is setting in 115VAC position.
Important:
Failure caused by improper voltage application will not be covered under
warranty.
This product is designed to operate in an ambient temperature environment not to
exceed 50°C (122°F). Please ensure that this unit is mounted in such a way that vents
are not blocked and ambient temperature does not exceed 50°C.
1
Advertisement
Table of Contents
