Advertisement
5.Replacement Guide
INSTALLATION
6. Install the night lamp and fluorescent lamps.
(Fig.6)
7. Install light kit cover assembly. (Fig.7)
8. Insert the grille mounting spring on the wiring
side into the slot and insert the plug connector
into the housing of the lighting unit.(Fig.8)
CAUTION
Before turn on the light, make sure the
connector at the correct position. If not, the
lighting can't work.
The claw of connector must latch the rib
completely. (Fig.8)
9. Insert the sensor unit into slot of the grille
(position ① . Fix the sensor lead wire into the
)
clasp (position ② (Fig.9)
10. Insert the other mounting spring into the slot as
shown and mount grille to fan body. (Fig.10)
CAUTION
Mount grille carefully so that lead wire of
sensor unit and lighting unit is not pinched.
).
Fluorescent
lamp
3
Light kit cover
assembly
Ceiling
Plug connector
Gloves
lighting unit
Insert
Rib
Plug connector
Claw
Sensor unit
Clasp
Ceiling
Grille
Night lamp
Fig.6
Secure screw
(M4X8)
Fig.7
Mounting spring
Grille
lighting unit
Fig.8
Grille
Fig.9
Mounting spring
Gloves
Fig.10
9
Advertisement
