Leveling - GE JHP64G Use And Care Manual

Cooking Center
Your cooking center, like many
other household items, is heavy
and can settle into soft floor
coverings such as cushioned vinyl
or carpeting.
When moving the
cooking center on this type of
flooring, use care, and it is
recommended that these simple
and inexpensive instructions be
followed.
The cooking center should be
installed on a l/4-inch-thick sheet
of plywood (or similar material) as
follows: When the floorcovering
ends at the front of the cooking
center will rest on should be built
up with plywood to the same level
or higher than the floor covering.
This will then allow the cooking
center to be moved for cleaning or
servicing.
Leveling the
Cooking Center
Leveling screws are located on
each corner of the base of the
cooking center. By removing the
bottom drawer you can level the
cooking center to an uneven floor
with the use of a nutdriver.
To remove drawer, pull drawer out
all the way, tilt up the front and
remove it. To replace, insert glides
at back of drawer beyond stop on
glides. Lift drawer if necessary to
insert easily. Let front of drawer
down, then push into close.
7
When Power is
Connected to
the Oven
The panel displays all of the oven
functions. After 15 seconds, all
lights disappear and "RESET"
appears in the display. Touch
CLOCK pad and set the clock and
then touch START pad.
If power is disrupted at any time,
the above sequence recurs and you
must reset the clock.