Starting Hibernation Mode - Toshiba Satellite Pro R50-B Series User Manual

Starting Hibernation Mode

To enter Hibernation Mode, click Start, point to the arrow (
Shut down button and then select Hibernate from the menu.
Automatic Hibernation Mode
The computer can be configured to enter Hibernation Mode automatically
when you press the power button or close the lid. In order to define these
settings, you can follow the steps as described below:
1.
2.
3.
4.
Data save in Hibernation Mode
When you turn off the power in Hibernation Mode, the computer will take a
moment to save the current data in memory to the HDD/SSD.
After you turn off the computer, and the content of memory has been saved
to the HDD/SSD, turn off the power to any peripheral devices.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.
User's Manual
Click Start -> Control Panel -> System and Security -> Power
Options.
Click Choose what the power button does or Choose what
closing the lid does.
Enable the desired Hibernation Mode settings for When I press the
power button and When I close the lid.
Click the Save changes button.
) beside the
2-10