Lan - Draytek VigorAP 710 User Manual

Note: The Wireless LAN settings will be changed according to the Operation Mode
selected here. For the detailed information, please refer to the section of Wireless LAN.
3 . 2 L A N
3 . 2 L A N
Local Area Network (LAN) is a group of subnets regulated and ruled by modem.
Click LAN to open the LAN settings page and choose General Setup.
Note: Such page will be changed according to the Operation Mode selected. The
following screen is obtained by choosing AP as the operation mode.
Available settings are explained as follows:
Item
IP Address
Subnet Mask
Default Gateway
Enable Management
VLAN
Description
Type in private IP address for connecting to a local private
network (Default: 192.168.1.2).
Type in an address code that determines the size of the network.
(Default: 255.255.255.0/ 24)
In general, it is not really necessary to specify a gateway for
VigorAP 710. However, if it is required, simply type an IP
address as the gateway for VigorAP 710. It will be convenient
for the access point acquiring more service (e.g., accessing NTP
server) from Vigor router.
VigorAP 710 supports tag-based VLAN for wireless clients
accessing Vigor router. Only the clients with the specified
VLAN ID can access into VigorAP 710.
VLAN ID - Type the number as VLAN ID tagged on the
25
VigorAP 710 User's Guide