Capacities And Specifications - 2.0L Ecoboost - Ford ESCAPE 2017 Owner's Manual

E142732
An oil that displays this symbol conforms
to current engine, emission system and
fuel economy performance standards of
the International Lubricants Specification
Advisory Committee (ILSAC).

CAPACITIES AND SPECIFICATIONS - 2.0L ECOBOOST

Capacities
The air conditioning refrigerant system contains refrigerant under high pressure.
Only qualified personnel should service the air conditioning refrigerant system.
Opening the air conditioning refrigerant system can cause personal injury.
Engine oil (with oil filter)
Engine coolant
Brake fluid
Rear differential fluid
Power Transfer Unit (PTU) fluid
Automatic transmission fluid
Windshield washer fluid
Fuel tank
Escape/Kuga (TM2), enUSA, First Printing
Capacities and Specifications
WARNING
Item
Do not use supplemental engine oil
additives because they are unnecessary
and could lead to engine damage that may
not be covered by your vehicle warranty.
Note: Ford recommends using DOT 4 Low
Viscosity (LV) High Performance Brake Fluid
or equivalent meeting WSS-M6C65-A2. Use
of any fluid other than the recommended
fluid may cause degraded brake
performance and not meet the Ford
performance standards. Keep brake fluid
clean and dry. Contamination with dirt,
water, petroleum products or other
materials may result in brake system
damage and possible failure.
Note: Automatic transmissions that require
MERCON LV transmission fluid should only
use MERCON LV transmission fluid. The
use of any other fluid may cause
transmission damage.
5.7 qt (5.4 L)
10.4 qt (9.8 L)
Between MIN/MAX on brake fluid reservoir
2.4 pt (1.15 L)
17.9 fl oz (0.53 L)
9.0 qt (8.5 L)
Fill as required
16.2 gal (61.3 L)
304
Capacity
*