TCS HE220A Product Data
  1. Manuals
  2. Brands
  3. TCS Manuals
  4. Humidifier
  5. HE220A
  6. Product data
TCS HE220A Product Data

TCS HE220A Product Data

Bypass flow-through humidifier
Hide thumbs Also See for HE220A:
Table of Contents

Advertisement

Quick Links

Download this manual
APPLICATION
The HE220A and HE260A Bypass Flow-through Humidifiers
use the warm air furnace blower to provide humidification for
the whole house.
® U.S. Registered Trademark
Copyright © 2002
• All Rights Reserved
Bypass Flow-Through Humidifier
HE220A and HE260A
FEATURES/BENEFITS
• Capable of humidifying a large area.
• Proven technology used for high performance
humidification and enhanced comfort.
• Preassembled for quicker installation.
• Small footprint, light weight and reversible
components allow easy mounting on either warm air
supply or return air duct of any forced air furnace.
• Interior components designed for quick maintenance
and service.
• Includes easy-to-use humidity control which mounts
on the wall or duct for more installation flexibility.
• Continuous flushing reduces the frequency of
maintenance in a hard water installation.
PRODUCT DATA
68-0272

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HE220A and is the answer not in the manual?

Questions and answers

Related Manuals for TCS HE220A

Summary of Contents for TCS HE220A

  • Page 1 • Continuous flushing reduces the frequency of maintenance in a hard water installation. APPLICATION The HE220A and HE260A Bypass Flow-through Humidifiers use the warm air furnace blower to provide humidification for the whole house. ® U.S. Registered Trademark Copyright ©...

  • Page 2: Specifications

    See Table 3. sure drop across supply and return: HE220A: 12 gallons per day (gpd) or 46 liters per day (lpd) Table 3. Dimensions of Plenum Opening In In. (mm).. HE260A: 17 gallons per day (gpd) or 65 liters per day (lpd).

  • Page 3: Installation

    Can cause water damage to home or permanent equipment damage. • The humidifier must be located where the ambient Fig. 1. Dimensions of HE220A in in. (mm). temperature is above 32°F and below 160°F (0°C and 71°C). ( 2 3 •...

  • Page 4: Wiring The Humidifier

    HE220A AND HE260A BYPASS FLOW-THROUGH HUMIDIFIER 2. Tape the template in position and trace around the tem- plate. WATER 3. Remove the template and carefully cut the rectangular FEED NOZZLE opening. HUMIDIFIER 4. Disassemble the humidifier; remove the cover and take PAD ASSEMBLY out the humidifier pad assembly.

  • Page 5: Plumbing The Saddle Valve

    Hot or cold water, either hard or softened, can be used in the humidifier. The HE220A and HE260A Humidifiers are controlled by the 1. Use the self-piercing saddle valve (included) to tap into H8908B Humidistat that is installed either on an interior wall in the water supply line at an appropriate location.

  • Page 6: Maintenance

    HE220A AND HE260A BYPASS FLOW-THROUGH HUMIDIFIER warm dry air from the furnace passes over the humidifier pad 18. Replace humidifier cover. and collects moisture and them circulates it through the 19. Verify humidifier operation by following steps in Check- house.

  • Page 7: Troubleshooting (Table 6)

    If moisture persists, move ventilation is needed. REPLACEMENT PARTS (FIG. 6 AND TABLE 7) Table 7. HE220A, HE260A Humidifier Replacement Parts.. Exploded View Number Description HE220 Part Number HE260 Part Number...
  • Page 8 HE220A AND HE260A BYPASS FLOW-THROUGH HUMIDIFIER M20845 Fig. 6. Exploded view of humidifier parts. Automation and Control Solutions Honeywell Honeywell Limited-Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422 Scarboroug, Ontario MiV 4V9 Printed in U.S.A. on recycled 68-0272 G.H.

This manual is also suitable for:

He260a

Table of Contents