Shark HV320EU Owner's Manual page 29

FLOOR
This vacuum has a 2-speed POWER slider switch, optimized for bare floor, delicate area rug and carpet cleaning.
CLEANING
The floor nozzle is equipped with headlights that illuminate the floor surface being cleaned. The lights turn on in either speed setting.
1 Plug the unit into an outlet. Slide the POWER switch to the first position to clean bare floor surfaces and delicate area rugs. The brush roll will spin slowly to help
with debris pick-up.
2 Slide the POWER switch to the second position to clean carpets. The brush roll will spin faster to help pick up debris below the surface.
NOTE: This vacuum does NOT stand upright on its own. When taking a break, rest it against a wall or piece of furniture or lay it flat on the floor.
High Pile
Carpet
Bare Floor,
Area Rug
Off
1
High Pile 2
Carpet
Bare Floor,
Area Rug
Off
2 9